The EPOCA, EPOCA STORICA, MATERIA, STRUTTURA, LEGO, and INTEGRA product lines provide a comprehensive approach to restoration, repair, and structural strengthening, offering designers and contractors technically consistent, high-performance, and mutually compatible solutions.
The EPOCA and EPOCA STORICA lines include plastering and masonry mortars, as well as finishing coats based on natural hydraulic lime (NHL), designed for conservative restoration, remediation, and structural strengthening.
High breathability, low mechanical stiffness, and compatibility with existing substrates make these products particularly suitable for historic buildings, including protected ones, and for traditional masonry.
These formulations are also suitable as matrices in CRM and FRCM strengthening systems, in line with modern conservation principles.
The MATERIA line is dedicated to plastering, masonry mortars, and finishing products for the conservation and structural strengthening of stone and brick elements.
Available in different strength classes, these products allow the intervention to be tailored according to the characteristics of the substrate and the required performance level.
The range is an integral part of CRM and FRCM systems and meets the technical requirements for structural strengthening.
The STRUTTURA line includes specific solutions for the repair, restoration, and strengthening of concrete structural elements.
The range includes thixotropic and flowable mortars for consolidation, cement-based smoothing compounds for surface regularization, structural micro-concretes for section enlargement, and fiber-reinforced strain-hardening mortars for strengthening slabs, beams, and other load-bearing elements.
It also includes fluid mortars for structural anchoring and specific products for the installation of expansion joints.
All products comply with UNI EN 1504 standards and meet the requirements of major public and infrastructure specifications.
The LEGO line includes shrinkage-compensated binders for producing volumetrically stable mortars and concretes.
These solutions are particularly suitable for applications where it is necessary to limit or eliminate shrinkage, reducing the risk of cracking and improving durability.
They are used in structural castings, slabs, industrial flooring, foundation plates, and in all applications where material continuity and crack control are essential design requirements.
The INTEGRA line complements the system with a range of auxiliary products designed to optimize intervention performance.
It includes corrosion protection for reinforcing steel, high-adhesion and high-toughness bonding resins, polymer latexes to improve adhesion on critical substrates, additives to modify rheological, mechanical, and physico-chemical properties of mortars and concretes, as well as selected aggregates.
The coordinated use of these components enhances reliability, durability, and execution quality of the intervention.
Masonry Interventions
In interventions on existing masonry, Fibre Net technical mortars allow for a coherent approach to repair, repointing, surface regularization, and structural strengthening, depending on the substrate characteristics and design objectives.
The EPOCA, EPOCA STORICA, and MATERIA lines include plastering and masonry mortars, as well as finishing products specifically designed for stone and brick constructions, including historic and protected buildings.
The formulations, available with different mechanical and compatibility properties, are also suitable as matrices in CRM and FRCM strengthening systems, contributing to effective, compatible, and durable interventions.
Fiber-Reinforced Products with Ductile Behavior
For the strengthening of slabs, beams, and other structural elements, Fibre Net offers fiber-reinforced mortars with ductile behavior designed to increase the load-bearing capacity of the system and improve its deformation response.
These solutions, belonging to the STRUTTURA line, are formulated to ensure adequate mechanical performance, continuity of adhesion to the substrate, and long-term reliability, making them particularly suitable for interventions requiring a high-performance matrix for the distributed strengthening of load-bearing elements.
The use of fiber-reinforced products makes it possible to combine load-bearing capacity, crack control, and durability of the intervention system.
Concrete Reconstruction
In interventions involving surface or volumetric reconstruction of deteriorated concrete, Fibre Net offers a range of repair mortars and complementary products designed to restore the geometry, continuity, and performance of the structure.
The STRUTTURA line includes thixotropic and flowable mortars for the repair of vertical and horizontal elements, while the INTEGRA line complements the system with corrosion protection for reinforcement steel, bonding resins for casting joints, and adhesion promoters.
This system-based approach allows for technically consistent intervention across all phases of repair—from substrate preparation to the reconstruction of degraded sections, up to the restoration of the structural element’s service conditions.
Casting Repair and Section Enlargement
For interventions requiring the restoration of significant thicknesses or the enlargement of structural elements through casting, Fibre Net offers pourable mortars and micro-concretes formulated to ensure volumetric stability, homogeneous casting, and adequate mechanical performance.
The STRUTTURA line includes flowable products for the strengthening and reconstruction of concrete sections, while the LEGO range provides shrinkage-compensated binders particularly suitable where it is necessary to limit the risk of shrinkage cracking.
These solutions are suitable for section enlargement, composite slabs, localized reconstructions, and applications where the structural continuity of the new casting is an essential requirement.
Infrastructure-Specific Products
For interventions on civil and infrastructure works, Fibre Net offers technical mortars and complementary products developed to meet the performance requirements typical of bridges, viaducts, underpasses, retaining structures, and other constructions exposed to severe environmental conditions.
The STRUTTURA line includes solutions for the repair, strengthening, section enlargement, and surface regularization of concrete elements, while INTEGRA and LEGO complete the system with auxiliary products for adhesion, passivation, anchoring, and volumetric stability control.
The range is designed to ensure application compatibility, durability, and compliance with the main regulatory and specification requirements in the infrastructure sector.
Installation of Expansion Joint Systems
Fibre Net develops specific solutions for the installation and maintenance of expansion joint systems in road and railway applications, with intervention cycles designed to ensure execution reliability, durability, and, where required, rapid reopening to traffic.
The available technologies cover the main operational phases: reconstruction of base layers, end blocks, and transition slabs using fiber-reinforced mortars; anchoring of bars and anchor bolts; bonding of flashing elements; bedding of the joint system; and sealing of the slots.
The range therefore includes mutually compatible complementary products, developed to ensure consistent performance of the system and adequate behavior under service conditions, even in demanding environments.
2
of 15
Back to home